Operator Obligation; Warranty And Liability - Deprag MINIMAT-ULTRA 347-220-31L Operating Instruction Booklet

Stationary screwdriver spindle
Table of Contents

Advertisement

1.4. Operator Obligation

Personnel, who is engaged in the operation of the equipment, must always be
committed to
observe the basic safety and accident preventing regulations,
read and observe the safety and warning notifications of this operating
instruction booklet.

1.5. Warranty and Liability

Unless otherwise specified, our "General Sales and Delivery Conditions"
apply. Warranty and liability claims in regards to persons or equipment
damages are invalid, if one or several of the following causes apply:
• Use of the equipment in a non-designated application.
• Improper installation, operation, service or maintenance of the machine.
• Operation of the machine with either defective or removed safety and
protection devices.
• Non-observance of the requirements stated in the operating instruction
booklet, in regards to transportation, storage, mounting, installation,
operation, maintenance and service of the equipment.
• Structural change or adjustment on the equipment to a non-designated
use.
• Inadequate supervision of wear parts.
• Improper repair, inspection or maintenance.
• Catastrophic cases because of a war, acts of god or other reasons which
are beyond our control.
5

Advertisement

Table of Contents
loading

Table of Contents