Align the holes on the rear bracket and the holes on the rack.
4.
Secure the rear bracket to the rack with the screws.
5.
Connect the cabling to the rear side of the system.
6.
Open the storage nodes (on page 25).
7.
Install all the 3.5" HDD assemblies (on page 58).
8.
Close the storage node (on page 26).
9.
Removing the rackmount rail
To remove the rackmount rail:
Remove the chassis from the rack (on page 80).
1.
Remove the cage nut from the rack.
2.
Hardware options installation 83