Installing The Rackmount Rail - HP Cloudline CL5200 Gen9 User And Maintenance Manual

Remove the screws securing the rackmount rail to the rack.
3.
Remove the rackmount rail.
4.
Repeat the procedure for the additional rackmount rail.
5.

Installing the rackmount rail

To install the rackmount rail:
Install the front side of the rail first.
1.
Secure the rail to the rack post with the screws.
2.
Extend the rear of the rail until the rear rail brackets are flush with the rear rack post.
3.
Secure the rackmount rail to the rack with the screws.
4.
NOTE: For square holes: Screw A, Ø9.1mm. For round holes: Screw B, Ø6.8mm.
Hardware options installation 84