Indoor Unit (Setting By Wireless Remote Controller) - Fujitsu ASYG07-14KGTF Service Manual

1-2. Indoor unit (setting by wireless remote controller)

CAUTION
This setting changes the function settings used to control the indoor unit according to the installa-
tion conditions. Incorrect settings can cause a product malfunction.
• After the power is turned on, perform the "Function setting" according to the installation conditions
using the remote controller.
• The settings may be selected between the following two: Function number or Setting number.
• Settings will not be changed if invalid numbers or setting numbers are selected.
¢ Preparation
Before connecting the power supply of the indoor unit, reconfirm following items:
• Piping air tightness test and vacuuming have been performed firmly.
• There is no wiring mistake. Then, connect the power supply of the indoor unit.
1-2. Indoor unit (setting by wireless remote controller)
- (05-3) -
1. Function settings (for indoor unit)