Fujitsu ASYG07-14KGTF Service Manual page 457

5) Static pressure (for Mini duct type and Slim duct type)
Select the appropriate static pressure according to the installation conditions.
For mini duct type:
Function number
26
NOTES:
• Range of static pressure is different by model.
• Setting number in 07, 09, 12 models is "04 to 30": Operation is same as that "03".
• Setting number in 14, 18 models is "06 to 30": Operation is same as that "05".
• Setting number value cannot be set to 32 or more.
For slim duct type:
Function number
26
6) Horizontal louver direction switching for dew condensation prevention (for KE model in
Wall-mounted type only)
Automatically switches the position of the horizontal louver if the airflow direction is set at lower than
the dew condensation limit position in cooling or drying operation.
Select suitable adjustment position according to the customer's preference.
Function number
28
1-5. Function details
Setting value
00
01
02
03
04
05
31
Model
07, 09, 12 models
14, 18 models
Setting value
00
01
02
03
04
05
06
07
08
09
31
Setting value
00
01
Setting description
0 Pa
10 Pa
20 Pa
30 Pa
40 Pa
50 Pa
Standard
(10 Pa: 07; 09; 12 models, 15 Pa: 14; 18
models)
Range of static pressure
Setting description
0 Pa
10 Pa
20 Pa
30 Pa
40 Pa
50 Pa
60 Pa
70 Pa
80 Pa
90 Pa
Standard (25 Pa)
Setting description
Adjust to dew condensation limit position
Adjust to cooling standard position
- (05-43) -
Factory setting
♦
0 to 30 Pa
0 to 50 Pa
Factory setting
♦
Factory setting
♦
1. Function settings (for indoor unit)