Fujitsu ASYG07-14KGTF Service Manual page 443

6. "Function No." screen is displayed. Set the "Function No." with
When the "OK" is touched, the display returns to the "Function Setting" screen.
7. Touch the "Function No." on the "Function Setting" screen.
NOTE: *1: When "All" is chosen by "5", and different set up "Setting No." from two or more indoor
units, "-" is displayed on "Setting No.".
8. Setting screen of "Setting No." is displayed. Set the "Function No." with
Example: Function number: 30, Setting Number: 01
When the "OK" is touched, the "Function Setting" verification screen is displayed.
1-3. Indoor unit (setting by wired remote controller)
Function No.
30
Cancel OK
Function Setting
Address [002–01]
Function No.
Setting No.
Back Setting
Function Setting
Address [002–01]
Function No.
Setting No.
01
Cancel OK
- (05-29) -
or .
[30]
[00]
*1
or
[30]
1. Function settings (for indoor unit)
.