Volkswagen Passat 2015 Manual page 88

Passat 2015 ➤, Passat 2019 ➤, Passat Variant 2015 ➤, Passat Variant 2019 ➤
Maintenance - Edition 11.2020
– Screw in new oil drain plug with new seal and tighten it to
specified torque. Oil drain plug is fitted with captive seal.
Specified torque
Oil drain plug
Filling with oil
– Remove oil filler plug -1-.
– Separate angled piece -B- from adapter -A- and screw
adapter fully in oil filler hole.
– Reconnect angled piece and route hose above drive shaft to
prevent sagging.
– Place drip tray for workshop hoist -VAS 6208- under final
drive.
– The vehicle can be lowered as soon as the hose above the
rear left wheel leads away from the vehicle.
Note
The prescribed temperature range for oil during oil level
♦
check is 20°C to 40°C.
Observe the temperature of oil container when topping up
♦
oil.
After topping up oil, the temperature gauge -VAS 6519- can
♦
be used for measuring oil temperature.
Oil capacity and oil specification
– Screw oil container -A- onto charging device -VAS 6291 A-
with valve closed -arrow-.
84
4. Descriptions of work
⇒ page 86
Nm
30