Automatic Headlight Control And Static Cornering Light: Checking Function; Automatic Gearbox: Changing Atf (0C8 Gearbox); Battery: Checking Charge Level - Volkswagen Touareg 2010 Maintenance Manual

– Check anti-roll bar bearing -arrow- for damage.
4.2 Automatic headlight control and static
cornering light: checking function
4.2.1 Static cornering light (cornering light):
checking function
– Switch on ignition and dipped beam or driving light assist.
– Turn steering wheel from centre position one turn to the right
and check whether bulb lights up in right fog light.
– Repeat this procedure for the left side.
4.2.2 Automatic headlight control (Driving
Light Assist): checking function
• Prerequisite: The test can only be carried out in daylight.
– Turn light switch to position for Driving Light Assist.
During daylight, the headlights should not light up.
– Cover rain and light sensor near the interior mirror. Use a suit‐
able object on the outside to do this.
This measures the light incidence and both headlights are switch‐
ed on.
4.3 Automatic gearbox: changing ATF (0C8
gearbox)
– ⇒ Rep. gr. 37 ; ATF; Draining and filling ATF
4.4

Battery: checking charge level

Note
The battery charge status check is only permissible within the
scope of the pre-delivery inspection.
– Connect vehicle diagnostic tester
– Switch on ignition.
– Carry out identification of vehicle.
– Enter task data, or select "Without task".
– Select "Control unit list".
– Select "Data bus diagnostic interface".
ODIS Service
⇒ page 22 .
Touareg 2010 ➤ , Touareg 2015 ➤
Maintenance - Edition 02.2019
4. Descriptions of work:
37