Passat 2015 ➤, Passat 2019 ➤, Passat Variant 2015 ➤, Passat Variant 2019 ➤
Removing blocking pieces on piston rod
– Relieve weight on coil springs by raising vehicle with a hoist.
– Slide suspension strut protective sleeve -arrow- upwards.
NOTICE
On the front axle, up to 3 blocking pieces are installed on
each side.
Usage of any auxiliary means for removal (such as lubricant
spray, silicone or similar) is not permitted.
– Push visible blocking piece -arrow- off piston rod.
– Slightly press in bellows to sense the remaining blocking
pieces. Slide them downwards on piston rod towards shock
absorber cap using the folds of the bellows.
– Push remaining blocking pieces off piston rod.
– Check bellows -arrows- all-round for dents and rectify any
dents.
Maintenance - Edition 11.2020
4. Descriptions of work
189