Activation Of Environment Monitoring System (Front Assist): Checking; Automatic Headlight Control And Static Cornering Light: Checking Function - Volkswagen Passat 2011 Maintenance Manual

Hide thumbs Also See for Passat 2011:
Table of Contents

Advertisement

– Check sealing boots of coupling rod -arrows- for damage.
– Check anti-roll bar bearing -arrow- for damage.
4.2
Activation of environment monitoring
system (Front Assist): checking
Before vehicle is delivered to customer, the environment moni‐
toring system should be checked to ensure it is active. When
ignition is switched on, active status can be recognised by green
warning lamp in dash panel insert. Environment monitoring sys‐
tem is fitted depending on equipment. Maintenance point is dis‐
played in maintenance list depending on PR number.
If system is not active, proceed as follows.
– Switch on ignition.
– Select menu "Assist Systems" in dash panel insert menu.
– There, mark "Front Assist" entry, and set tick and confirm with
"OK".
– Switch off ignition.
System is now active.
4.3
Automatic headlight control and static
cornering light: checking function
Automatic headlight control
Note
The automatic headlight control was formerly called driving light
assist.
Vehicle must be in natural daylight.
Checking in daylight or brightness
– Switch on ignition.
Passat 2011 ➤ , Passat Variant 2011 ➤
Maintenance - Edition 01.2019
39
4. Descriptions of work:

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Passat variant 2011

Table of Contents