Keithley 6487 User Manual page 20

Model 6487 User's Manual Getting Started 1-5
Model 8606 High Performance Probe Tip Kit — Consists of two spade lugs, two alliga-
tor clips, and two spring hook test probes. (The spade lugs and alligator clips are rated at
30V RMS, 42.4V peak; the test probes are rated at 1000V.) These components are
designed to be used with high performance test leads terminated with banana plugs, such
as the Model 8607 High Performance Banana Cables.
Model 8607 High Performance Banana Cables — Consists of two high voltage (1000V)
banana cables. The cables are terminated with banana plugs that have retractable sheaths.
CAP-31 Protective Shield /Cap — For use with 3-lug triax connectors.
Interlock cables and connector
Model 6517-ILC-3 Interlock Cable — Designed to connect the interlock of the Model 6487
to the Model 8009 test fixture.
Model 8002-ILC-3 Interlock Cable — Designed to connect the lid interlock circuit of a
test fixture to the interlock circuit of the Model 6487.
CS-459 4-pin Female Interlock Connector — Allows custom wiring of external circuits
to the Model 6487 interlock.
GPIB, RS-232, and trigger link cables and adapters
Models 7007-1 and 7007-2 shielded GPIB cables — Connects the Model 6487 to the
GPIB bus using shielded cables and connectors to reduce electromagnetic interference
(EMI). Model 7007-1 is lm long; Model 7007-2 is 2m long.
Model 7009-5 shielded RS-232 cable — Connects the Model 6487 to the RS-232 inter-
face using shielded cable and connectors to reduce electromagnetic interference (EMI).
Model 7009-5 is 5 ft. long.
Models 8501-1 and 8501-2 trigger link cables — Connects the Model 6487 to other
instruments with Trigger Link connectors (e.g., Model 7001 Switch System). Model 8501-1
is lm long; Model 8501-2 is 2m long.
Model 8502 trigger link adapter — Lets you connect any of the six trigger link lines of
the Model 6487 to instruments that use the standard BNC trigger connectors.
Model 8503 DIN to BNC trigger cable — Lets you connect trigger link lines one
(Voltmeter Complete) and two (External Trigger) of the Model 6487 to instruments that
use BNC trigger connectors. Model 8503 is lm long.