Advertisement
Fitting of the Mounting Plate and Positioning of the wall Hole
When the mounting plate is first fixed
1. Carry out, based on the neighboring pillars or lintels, a proper leveling for the plate to be fixed against the wall,
then temporarily fasten the plate with one steel nail.
2. Make sure once more the proper level of the plate, by hanging a thread with a weight from the central top of the
plate, then fasten securely the plate with the attachment steel nail.
3. Find the wall hole location A using a measuring tape.
HVVA-025/022N-01M22
HVVA-035N-01M22
Pay attention to the following points before installation of machine:
1. Take out cushion blocks on the left and right angle beads as
shown in the following Figure.
HVVA-050/045N-01M22
HVVA-070N-01M22
265
Advertisement
