Culligan waterlogic BAR CLASSE Series Technical Manual page 5

Table of Contents

Advertisement

Use a water pressure regulator: Waterlogic will not be responsible for injury or damage
caused by excessive water pressure. Input or feed pressure must be regulated to 3 bar.
Be aware of any potential pressure surges caused by building/municipal pumping
stations. Water block devices and external leak detectors are strongly recommended.
Authorized use only: This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by children without
supervision.
This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments;
– farm houses and by clients in hotels, motels and other residential type
environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.
UV-C emitter (UV lamp): this appliance contains a UV-C emitter (UV Lamp). UV-C radiation
may, even in little doses, cause harm to the eyes and skin. Never operate the UV-C emitter
if damaged or removed from enclosure. Do not touch or look directly into the faucet. The
replacement of the UV-C must be done by Waterlogic or approved Waterlogic distributors
and with power supply disconnected. The UV lamp must be replaced at 6-month intervals
or when necessary.
Do not operate if damaged: If the machine or supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
This appliance contains a UV-C emitter: Unintended use of the appliance or
damage to the housing may result in the escape of dangerous UV-C radiation. UV-
C radiation may, even in little doses, cause harm to the eyes and skin.
Appliances that are obviously damaged must not be operated.
Replacement of the UV-C emitter cannot be conducted by the user, please contact
Waterlogic for assistance or help finding an Authorized Service Representative.
Read the maintenance instructions before opening the appliance.
The appliance must be disconnected from the supply before replacing the UV-C
emitter.
The appliance is to be supplied through a residual current device (RCD) having a
rated residual operating current not exceeding 30 mA.
Electrical shock hazard: always use a dedicated and properly earthed outlet. Unit should
be protected by residual current device (RCD) having a rated residual operating current
not exceeding 30 mA. Use only Waterlogic supplied power cord. Never use extension
cords or power strips to connect unit. Do not use if the supply cord is damaged, it must be
replaced by the service agent or a similarly qualified person in order to avoid a hazard.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Firewall wlh2

Table of Contents