Advertisement
Installing a Child Seat
7. Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
8. Lower the head restraint until it
locks in place.
9. Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
50
Installing a Child Seat with a Lap/
Shoulder Belt
When not using the LATCH system,
all child seats must be secured to the
vehicle with the lap part of a lap/
shoulder belt.
In addition, the lap/shoulder belts in
all seating positions except the
driver's have a lockable retractor that
must be activated to secure a child
seat.
2011 ZDX
1. With the child seat in the desired
seating position, route the belt
through the child seat according to
the seat maker's instructions, then
insert the latch plate into the
buckle and remove any slack from
the lap portion of the belt.
Advertisement
