Advertisement
You will see SCAN on the screen.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 10 seconds. If you do
nothing, the system will then scan for
the next strong station and play it for
10 seconds. When it plays a station
that you want to listen to, press the
SCAN side of the bar again.
Preset － Each preset button or
preset icon can store one frequency
on AM and two frequencies on FM.
To store a preset memory location:
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
2. Use the tune, skip (seek), scan, or
RDS function to tune the radio to a
desired station.
Playing the AM/FM Radio (Models with navigation system)
3. Press the preset button, and hold it
until you hear a beep. You can also
store frequencies with the
interface dial. Select the preset
icon you want to store the
frequency on, then press ENTER
on the interface selector, and hold
it until you hear a beep.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
2011 ZDX
A.SEL INDICATOR
A.SEL
AUTO SELECT － If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find strong
signal stations in the local area.
CONTINUED
281
Advertisement
