To use HFL, you need to pair your
Bluetooth-compatible cell phone to
the system.
Phone Setup
This command group is available for
paired cell phones.
Phone pairing tips
You cannot pair your phone while
●
the vehicle is moving.
Your phone must be in discovery
●
or search mode to pair. Refer to
your phone's manual.
Up to six phones can be paired.
●
Your phone's battery may drain
●
faster when it is paired to HFL.
If after three minutes your phone
●
is not ready to pair or a phone is
not found, the system will time out
and return to idle.
Bluetooth
HandsFreeLink
®
To pair a cell phone:
1. Press and release the HFL Talk
button. If you are pairing a phone
for the first time, HFL will give you
information about the pairing
process. If it is not the first phone
you are pairing, say ''Phone
setup'' and say ''Pair.''
2. Follow the HFL prompts and put
your phone in discovery or search
mode. HFL will give you a 4-digit
pairing code and begin searching
for your phone.
3. When your phone finds a
Bluetooth device, select HFL from
the options and enter the 4-digit
code from the previous step.
4. Follow the HFL prompts and name
the newly paired phone.
2011 ZDX
(Models without navigation system)
®
To rename a paired phone:
Press and release the HFL Talk
button before a command.
1. Say ''Phone setup.''
2. Say ''Edit'' after the prompts.
3. If there is more than one phone
paired to the system, HFL will ask
you which phone's name you want
to change. Follow the HFL
prompts and rename the phone.
CONTINUED
405