Advertisement
RIGID TYPE
4. Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker's instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
FLEXIBLE TYPE
Other LATCH-compatible seats
have a flexible-type connector as
shown above.
5. Whatever type you have, follow the
child seat maker's instructions for
adjusting or tightening the fit.
2011 ZDX
Installing a Child Seat
TETHER STRAP
6. Lift the head restraint (see page
162), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.
CONTINUED
49
Advertisement
