Collision Mitigation Braking System™ (CMBS™)
CMBS OFF Button
CMBS OFF BUTTON
To switch the CMBS off, press the
CMBS OFF button under the driver's
side vent for about 1 second. When
you do this, a beeper sounds, a
CMBS indicator on the instrument
panel comes on, and a CMBS OFF
message appears on the multi-
information display. To switch the
system back on, press the button
again for about 1 second.
502
When you select the ON mode by
operating the engine start/stop
button (see page 194), the CMBS will
be in the previously selected on or off
setting.
2011 ZDX
Automatic Shut Off
Any of the conditions below can cause
the CMBS to shut off. When the
system shuts off, the CMBS indicator
in the instrument panel comes on,
and a CHECK CMBS SYSTEM
message appears on the multi-
information display for about 5
seconds.
An abnormal tire condition is
●
detected (wrong tire size, flat tire,
etc.).
Extended off-road or mountainous
●
driving.
Driving your vehicle with the
●
parking brake applied.
Driving your vehicle in bad
●
weather (rain, fog, snow, etc.).
A dirty radar sensor cover on the
●
front grille.
The CMBS will automatically switch
on again if the conditions that caused
it to switch off are improved.