Advertisement
Vehicle Stability Assist (VSA
VSA and Tire Sizes
Driving with varying tire or wheel
sizes may cause the VSA to
malfunction. When replacing tires,
make sure they are of the same size
and type as your original tires (see
page 571).
If you install winter tires, make sure
they are the same size as those that
were originally supplied with your
vehicle. Exercise the same caution
during winter driving as you would if
your vehicle was not equipped with
VSA.
510
), aka Electronic Stability Control (ESC), System
®
Hill Start Assist
Your vehicle is equipped with a hill
start assist feature to help prevent
the vehicle from rolling on inclines as
you move your foot from the brake
pedal to the accelerator.
To activate hill start assist, you must
come to a complete stop and make
sure the shift lever is either in D or S
when facing uphill, or reverse when
facing downhill.
This feature begins working a few
seconds after you are in the correct
gear position. Release the brake
pedal. The brakes remain engaged
briefly to keep the vehicle from
rolling forward or backward. Gently
apply the accelerator pedal as in
normal driving. Hill start assist will
release brake pressure gradually as
you accelerate.
2011 ZDX
Hill start assist may not prevent your
vehicle from rolling downhill on a
very steep or slippery slope, and will
not operate on small inclines.
Hill start assist is not a replacement
for the parking brake. If parking your
vehicle, ensure that the transmission
is in park, and/or the parking brake
is fully applied before exiting the
vehicle.
If the VSA system indicator comes on
with a ''CHECK HILL START
ASSIST SYSTEM'' message on the
multi-information display, there may
be a problem with the hill start assist.
The VSA also may not function. Have
your vehicle inspected by your
dealer.
Hill start assist will still operate even
when VSA is switched off.
Advertisement
