MEMORY BUTTONS
SET BUTTON
3. Press and release the SET button
on the door. You will hear a beep.
Immediately press and hold one of
the memory buttons (1 or 2) until
you hear two beeps. The indicator
in the memory button will come
on. The current positions of the
driver's seat, steering wheel, and
outside mirrors are now stored.
Doing any of the following after
pressing the SET button will cancel
the storing procedure.
Not pressing a memory button
●
within 5 seconds.
Readjusting the seat or steering
●
wheel position.
Readjusting the outside mirror
●
position.
On models without keyless access
system
Turn the ignition switch out of the
●
ON (II) position.
On models with keyless access
system
Change the power mode from ON.
●
2011 ZDX
Driving Position Memory System
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button's memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
CONTINUED
181