SMC Networks ZL6 Series Operation Manual page 20

Digital pressure switch for energy-saving control ejector

Hide thumbs Also See for ZL6 Series:

Table of Contents

｢Normal output (OUT1)｣

(1) Press the

button once in measurement mode. (Refer to page 17)

(2) "P_1" and the set value are displayed in turn.

(3) Press the

The

button is to increase vacuum pressure and the

•Press the

button once to increase by one digit, and press it continuously to keep increasing the set

value.

•Press the

button once to decrease by one digit, press it continuously to keep decreasing the set

value.

button to complete the setting of "P_1". The display shows [H_1] and the set value in turn.

(4) Press the

The

button is to increase and the

button to complete the setting of "H_1". The display shows [H_2] and the set value in

(5) Press the

turn.

The

button is to increase and the

(6) Press the

button to complete the setting.

When the reversed output is changed, the following parameters are displayed, and each set value can be

changed, using the method shown above.

For details of how to change the reversed output, refer to the setting of each function.

button to change the set value.

button is to decrease the set value.

-19-

button is to decrease.

NO.ZL3-OM00701-A

Table of Contents

Zl3 series Zse10