Display Color Change On Channel; Hazloc Battery Type Detection - Motorola APX 7000XE User Manual

NOTICE: You have the option of sending additional digits (overdial), such as an extension
number, credit card, or PIN numbers to the phone system. If the radio is preprogrammed for live
overdial, every digit entered after the call is connected, is sent to the phone system.
If the radio is preprogrammed for buffered overdial, the digits pressed are entered into memory
and then sent when the PTT button is pressed. Press the PTT button to send either digits or
voice, but not both at the same time.

Display Color Change On Channel

This feature provides visual channel identification where users are able to have a quick visual
recognition of being on a particular channel.
Your radio must be preprogrammed to allow you to use this feature.
When changing channels, the radio backlight on top display, radio keypad and accessories (DRSM)
changes to the preprogrammed color.
The backlight on top display and keypad changes to white. If connected to DRSM, the DRSM backlight
changes to white for the following scenarios:
• When changing to or powering up on an invalid channels such as unprogrammed channels,
receiver frequency error channel and blank channels
• The radio is in radio stun or radio lock mode
For hard key zeroize, key loading, and scan list programming, the backlight follows the home channel
backlight color.

HAZLOC Battery Type Detection

This feature alerts the user when there is a HAZLOC certification mismatch between the radio and the
battery. This feature supports IMPRES batteries only.
During power up, if there is a mismatch, the following scenarios occurs:
• The radio repetitively displays Wrong Battery with red intelligent backlight
• The radio Voice Announcement announces the preprogrammed Wrong Battery
• The Battery icon blinks continuously
• A repetitive tone sounds
• LED blinks RED continuously
NOTICE:
The radio does not display any indication when the radio is connected to the charger, when
the radio and battery match, or when the radio certification type is configured as "None" in
Customer Programming Software (CPS).
This feature is enabled through CPS configuration. Check with your dealer or system administrator for
more information.
68012006089-FK
Status Indicators
51