Using The Time-Out Timer; Time And Date Setup; Editing The Time And Date - Motorola APX 7000XE User Manual

2.26.12

Using the Time-Out Timer

When and where to use: This feature turns off the transmitter of your radio. You cannot transmit
longer than the preset timer setting.
If you attempt to do so, the radio automatically stops your transmission, and you hear a talk-prohibit
tone.
The timer is defaulted at 60 seconds, but it can be preprogrammed from 15 to 465 seconds, in 15-
second intervals, or it can be disabled entirely for each radio mode, by a qualified radio technician.
NOTICE: You hear a brief, low-pitched, warning tone four seconds before the transmission
times out.
Procedure:
1 Hold down the PTT button longer than the preprogrammed time.
You hear a continuous talk prohibit tone. After four seconds, the transmission is cut-off and the
LED goes out.
2 Release the PTT button.
The timer resets.
3 To re-transmit, press the PTT button.
The time-out timer restarts and the LED lights up solid red.
2.26.13

Time and Date Setup

You can set the time and date for your radio.
Settings:
• The default time setting is a 12-hour clock. The display shows 12:00AM.
• The AM/PM selection is not available for the 24-hour clock setting.
• The default setting for the domestic date shows MDY.
NOTICE: Check with your dealer or system administrator for additional programmable settings
for this feature.
2.26.13.1

Editing the Time and Date

Procedure:
1 or to Clck.
2 Press the Menu Select button directly below Clck.
The display shows the current setting of the radio.
3 Press the Menu Select button directly below Edit.
The first item blinks.
4 Perform one of the following actions.
• or to change the selected item.
68012006089-FK
Advanced Features
149