Phone Call Displays And Alerts; Display Color Change On Channel - Motorola APX 4000 User Manual

68012004058-HV
Chapter 4 : Status Indicators
You Hear Tone Name
Unique Multi-Function Knob
Low-High Enters Secondary
Tone Feature
Unique Multi-Function Knob
High-Low Exits Secondary Fea-
Tone ture
4.9

Phone Call Displays and Alerts

The following phone call displays and alerts appears on the radio display when you make and receive
phone calls. The radio also uses alert tones to indicate the current status.
You Hear You See
A Long No phone
Tone
Phone
busy
A Busy Phone
Tone busy
– No ac-
knowledge
A High- –
Pitched
Tone
NOTE: You have the option of sending additional digits (overdial), such as an extension
number, credit card, or PIN numbers to the phone system. If the radio is preprogrammed for live
overdial, every digit entered after the call is connected, is sent to the phone system.
If the radio is preprogrammed for buffered overdial, the digits pressed are entered into memory
and then sent when the PTT button is pressed. Press the PTT button to send either digits or
voice, but not both at the same time.
4.10

Display Color Change On Channel

This feature provides visual channel identification for users to have a quick visual recognition on a
particular channel.
Your radio must be programmed to allow you to use this feature.
The backlight on top lightbar indicator turns off and if connected to DRSM, the DRSM backlight
changes to white for the following scenarios:
• When changing to or powering up on invalid channels such as unprogrammed channels, receiver
frequency error channel and blank channels.
38
Heard
When Multi-Function Knob is toggled to secondary fea-
ture.
When Multi-Function Knob is toggled to exit secondary
feature and return to primary feature or when secon-
dary function timer expires.
When
You press the PTT
button and the phone
system is not availa-
ble.
The phone system is
busy.
When a channel is not
available.
The call is not ac-
knowledged.
When you release the
PTT button.
Notes
Press to hang up. The radio re-
turns to the Home screen.
Press to exit the phone mode and
try your call later.
The radio automatically connects
when a channel opens.
Press to hang up. The radio re-
turns to the Home screen.
The radio indicates to the landline par-
ty that the caller may begin talking.