Voice Announcement; Site Selectable Alerts (Astro 25) - Motorola APX 7000XE User Manual

68012006089-FK
Advanced Features
• Press the Menu Select button below Acpt to accept the request to upgrade immediately.
• Press the Menu Select button below Dlay to delay the request to upgrade.
• Press the Menu Select button below Rej to reject the request to upgrade.
One of the following scenarios occurs:
• If you choose to accept, the display shows Programming Dont power off to indicate the
upgrade is about to begin. The radio resets to install the upgrade. In the case of configuration data
upgrade, the process only takes a few seconds. In the case of firmware upgrade, the installation
takes several minutes.
NOTICE: The radio cannot be used while the upgrade is being installed. Therefore, make
sure to only accept the upgrade at a convenient time when immediate radio use is not
required.
• If you choose to delay, a configuration data upgrade is installed automatically at the next power up.
However, in the case of a firmware upgrade, the radio prompts Upgrade? again at the next power
up.
• If you choose to reject, the display shows Upg Aborted. The radio continues to function with the
current configuration until it gets reprogrammed.
NOTICE: If your radio has problems upgrading over-the-air, consult a qualified technician for
details.
2.24

Voice Announcement

This feature enables the radio to audibly indicate the current feature mode, zone, or channel the user
has just been assigned to. This feature is useful when you have difficulty reading the content on the
display.
If preprogrammed by a qualified radio technician, the following occurs:
• Channel Announcement is played in the following scenarios:
- When the radio powers up.
- When you change to a new zone.
- When you change to a new channel.
- When you press a preprogrammed button or switch.
• Feature Voice Announcement is played when you change the state of a feature. Various features
can have Voice Announcement assigned to indicate the on/off state of the features.
The available voice announcement priority options are:
High
Voice announcement is enabled even when the radio is receiving calls.
Low
Voice announcement is disabled when the radio is receiving calls.
2.25

Site Selectable Alerts (ASTRO 25)

A Site Selectable Alert (SSA) is an Intelligent Lighting indicator together with audio alert sent to radios
at a site or a few sites to notify the users when there is a special situation that they need to be aware
of.
Your radio supports up to 250 site aliases. Only authorized radios are enabled to send SSA. Upon the
activation of a SSA, the receiving radios display the alert alias and generate the periodic alert tone.
138