Phone Call Displays And Alerts; Display Color Change On Channel - Motorola APX 900 User Manual

Table of Contents

Advertisement

MN003441A01-AP
Chapter 4 : Status Indicators
4.7

Phone Call Displays and Alerts

The following phone call displays and alerts appears on the radio display when you make and receive
phone calls. The radio also uses alert tones to indicate the current status.
You Hear
You See
A Long
No phone
Tone
Phone
busy
A Busy
Phone
Tone
busy
No ac-
knowledge
A High-
Pitched
Tone
NOTE: You have the option of sending additional digits (overdial), such as an extension
number, credit card, or PIN numbers to the phone system. If the radio is preprogrammed for live
overdial, every digit entered after the call is connected, is sent to the phone system.
If the radio is preprogrammed for buffered overdial, the digits pressed are entered into memory
and then sent when the PTT button is pressed. Press the PTT button to send either digits or
voice, but not both at the same time.
4.8

Display Color Change On Channel

This feature provides visual channel identification for users to have a quick visual recognition on a
particular channel.
Your radio must be programmed to allow you to use this feature.
When changing channels, the accessories backlight (DRSM) changes to the programmed color.
The accessories backlight change to white for the following scenarios:
When changing to or powering up on invalid channels such as unprogrammed channels, receiver
frequency error channel and blank channels.
The radio is in radio stun or radio lock mode.
NOTE: Radio stun or radio lock mode is only applicable to Model 3.5.
For hard key zeroize, key loading, and scan list programming, the backlight follows the home channel
backlight color.
36
When
You press the PTT
button and the phone
system is not availa-
ble.
The phone system is
busy.
When a channel is not
available.
The call is not ac-
knowledged.
When you release the
PTT button.
Notes
Press
to hang up. The radio re-
turns to the Home screen.
Press
to exit the phone mode and
try your call later.
The radio automatically connects
when a channel opens.
Press
to hang up. The radio re-
turns to the Home screen.
The radio indicates to the landline par-
ty that the caller may begin talking.

Advertisement

Table of Contents
loading

Table of Contents