Standard Pairing Feature; Searching And Pairing The Bluetooth Device - Motorola APX 7000XE User Manual

68012006089-FK
Advanced Features
2.22.7

Standard Pairing Feature

NOTICE: Bluetooth tones, Bluetooth menu, and preprogrammed buttons must be
preprogrammed by a qualified radio technician. Check with your dealer or system administrator
for more information.
Once a COTS headset is paired to your radio, it is always connected. Therefore the battery life
of the accessory is aligned with the Talk time power consumption and not the Standby time
consumption.
The Bluetooth Standard Pairing feature enables your Bluetooth enabled radio to search for other
Bluetooth enabled and discoverable devices. Once a device is discovered, you can initiate your radio
to send a pairing request to pair with the device.
This feature also enables your Bluetooth enabled radio to be visible to other Bluetooth enabled devices
and receive request to pair from other devices.
The Standard Pairing feature supports pairing Authentication Personal Pairing Number or PIN which
ensure your radio recognizes the correct device to pair. The PIN must be exchanged with the radio or
the device before the pairing completes. Your radio prompts for the Authentication PIN when needed.
Refer to your device's manual for details about the Bluetooth Authentication PIN of your device if
needed.
2.22.7.1

Searching and Pairing the Bluetooth Device

Prerequisites: Ensure the Bluetooth on your device is turned on and is set to Discoverable in order
to enable your radio to detect your device in Bluetooth.
When and where to use: Bluetooth Search in Bluetooth Standard Pairing method is used to scan for
other Bluetooth devices nearby. It is set to turn off by default.
Procedure:
1 Perform one of the following actions.
• Press the preprogrammed Bluetooth Search button.
• or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature
screen. or
If successful, the display shows Searching for BT devices followed by the names of
Bluetooth devices found, if any. When the search timer expires, Available Dev screen shows a
list of Bluetooth devices found. To stop the search before the search timer expires, press the
preprogrammed Bluetooth Search button or the Menu Select button below Stop.
If the feature fails to initiate, the radio sounds a short, low-pitched tone. The screen shows BT
Search failed. Press the Menu Select button below Back to return to Bluetooth feature
screen, or press
2 or to the device name and press the Menu Select button directly below Sel to connect to
the device.
The radio starts pairing to the device.
Postrequisites: To continue with Bluetooth pairing, see
Proximity Pairing (LF-MPP) Feature on page
128
to Search Devices and press the Menu Select button directly below On.
or the Menu Select button below Exit to return to Home screen.
126.
Pairing with Low Frequency-Motorola