Advertisement
Quick Links
Single Ultrawide Monitor Desk Mount
Instruction Manual
SKU: STAND-V149
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v149
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Related Manuals for Vivo STAND-V149
Summary of Contents for Vivo STAND-V149
- Page 1 Single Ultrawide Monitor Desk Mount Instruction Manual SKU: STAND-V149 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v149 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
-
Page 2: Package Contents
If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. -
Page 3: Assembly Steps
STEP 1b ASSEMBLY STEPS Option B: Grommet Install If desk does not have an existing grommet hole, drill a 3/8” STEP 1a (10mm) diameter hole at the desired position through the mounting surface. OPTION A: Desk Clamp Install Mount Clamp (B) to the desktop and tighten using the plastic knob. Attach Soft Pads (K) to under side of Grommet Plate (H). - Page 4 STEP 2 STEP 4 Slide Pole Cable Clip (G) and Swivel Arm (C) onto Pole (A). Tighten Swivel Arm (C) at desired height OPTION A: Flat Back Monitor using 6mm Allen Wrench (T-B). Insert Pole Cap (E) into top of Pole (A). Attach the VESA plate (D) to the monitor with M4x12mm Thumbscrews (M-A).
- Page 5 STEP 6a STEP 5 Slide VESA Plate (D) with monitor onto the head of Swivel Arm (C). Install M6 Security Nut (S-A). 40” TO 49” MONITORS NOTE: Ensure the security nut is installed before you rotate the monitor. WARNING Large monitors can be very difficult to adjust by yourself. Please use caution and have someone assist you with adjusting your monitor to avoid possible damage or injury.
- Page 6 STEP 6b Further Adjustments Adjust monitor as desired. For 40” to 49” monitors, please follow instruction in Step 6a 32” TO 40” MONITORS for tilt adjustments. Use long 6mm Allen Wrench (T-C) to loosen the tilt-joint then adjust monitor to desired angle. Once fully adjusted, retighten the tilt-joint.
- Page 7 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V149 and is the answer not in the manual?
Questions and answers