Advertisement
Quick Links
Single Monitor Stand with Headphone Holder
Instruction Manual
SKU: STAND-V101F
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v101f
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-V101F
Summary of Contents for Vivo STAND-V101F
- Page 1 Single Monitor Stand with Headphone Holder Instruction Manual SKU: STAND-V101F Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v101f GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Tools Needed
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 17.6lbs Failure to do so may result in serious injury. (8 kg) Phillips Screwdriver ASSEMBLY STEPS STEP 1 Position left and right feet (B, C) together. Link feet using the connecting plate (H) with M5x6 bolts (K), and tighten with the 4mm Allen key (M). - Page 4 STEP 2 Assemble post (A) to feet using M6x20 bolts (J), and tighten with the 4mm Allen key (M). STEP 3 Snap cover (G) onto feet. Attach headset hook (E) to post using M3x8 screw (L) and tighten with a Phillips screwdriver.
- Page 5 STEP 4 OPTION A: Flat Back Monitor Attach VESA plate (D) to monitor using bolts (M-A or M-C) and washers (M-E). OPTION B: Curved Back Monitor Attach VESA plate (D) to monitor using bolts (M-B or M-D), washers (M-E), and spacers (M-F).
- Page 6 STEP 5 Slide VESA plate (D) onto bracket on post (A) and secure using thumb screw (I). Adjust monitor height by loosening the knob in back, then tighten the knob with monitor at desired height. Adjust tilt support using the 6mm Allen key (N), then press hinge covers in place.
- Page 7 STEP 6 Adjust monitor position and route cables through the cable hole. Headset or headphones may be stored on the headset hook in back. ±30 ° +15 ° ± 1 8 0 ° -15°...
- Page 8 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V101F and is the answer not in the manual?
Questions and answers