Advertisement
Quick Links
Pneumatic Arm Triple Monitor Desk Mount with Pull Handle
Instruction Manual
3
SKU: STAND-V101G3
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v101g3
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-V101G3
Summary of Contents for Vivo STAND-V101G3
- Page 1 Pneumatic Arm Triple Monitor Desk Mount with Pull Handle Instruction Manual SKU: STAND-V101G3 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v101g3 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Tools Needed
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 2.2 - 13.2lbs Failure to do so may result in serious injury. (1 - 6kg) PER SCREEN Phillips Screwdriver ASSEMBLY STEPS STEP 1 OPTION A: Clamp Installation Attach clamp brace (L) to base (A) using M6x12 flat head bolts (O) and tighten with 4mm Allen wrench (S). - Page 4 STEP 1 (Continued) OPTION B: Grommet Base Installation Attach grommet plate (J) to base (A) using M6x12 flat head bolts (O) and tighten with 4mm Allen wrench (S). Apply soft pad (K) to underside of base. Position base over grommet hole in desktop, or drill a 3/8” (10mm) hole through the desk for installation. Remove a bolt from the clamp (N), then insert removed bolt with clamp plate (I) up through the underside of the desk and tighten to the base using the 6mm Allen wrench (T).
- Page 5 STEP 6 Attach left and right arms (D, E) to center arm using M6x12 flat head bolts (O), making sure open ends of mounting brackets are facing up, and tighten with 4mm Allen wrench (S). STEP 7 Straighten arms for easier installation of monitors. STEP 8 Install the VESA plates (G) to monitors using M4x12 bolts (M-A) or M5x12 bolts (M-B) with washers (M-C), making sure the large end of each bracket in back is facing up.
- Page 6 STEP 10 If needed, adjust gas spring arm to support the monitors using the 4mm Allen wrench (S) . While holding arm in the straight forward position, turn the screw in back clockwise to decrease support, and counter-clockwise to increase. Slightly loosen the monitor arm for leveling if needed. STEP 11 Remove cable cover on upper arm using a Phillips screwdriver.
- Page 7 STEP 13 For safety, please do not extend the monitors behind the desk. This may cause instability and tip the desk over. Adjust as Desired...
- Page 8 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V101G3 and is the answer not in the manual?
Questions and answers