Table of Contents
Advertisement
Example 8: Comments
1.
Select Triangle from the Lines toolbox.
2.
Construct a triangle and label its vertices A , B , and C .
3.
Select Area from the Measure toolbox.
4.
Move the cursor to a side of the triangle until it changes
to the $ (the cursor message This triangle appears), and
click once.
Depending on the triangle and the default settings, a
number and units label, such as 4.520 cm
5.
Begin typing the comment Area of ABC = .
The comment attaches to the left side of the
measurement.
6.
Select Comments from the Display toolbox.
Move the 4 near the area (the cursor message Edit this
7.
text appears and the cursor changes to the I).
Click once and an edit box appears with the value of the
area and the comment entered in step 5 on the text line.
8.
Move the cursor between "of" and "ABC" in the text
line, and add the word triangle .
The text now reads "Area of triangle ABC = 4.520 cm
9.
Click on the toolbar or press
disappear, leaving the comment on the drawing
window.
Copying permitted provided TI copyright notice is included
© 1997, 1999 Texas Instruments Incorporated
2
, appears.
2
."
to make the edit box
ESC
This triangle
Area of ABC = 4.520 cm
Area of ABC = 4.520 cm
Area of triangle ABC = 4.520 cm
Chapter 1: Learning the Basics
2
2
2
1-21
Advertisement
Table of Contents
