Table of Contents
Advertisement
W A R N I N G
W A R N I N G
W A R N I N G
W A R N I N G
W A R N I N G
General Safety Considerations
This product has been designed and tested in accordance with IEC Publica-
tion 61010-1, Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use, and has been supplied in a safe condition. The
instruction documentation contains information and warnings that must be
followed by the user to ensure safe operation and to maintain the product in a
safe condition.
If this instrument is not used as specified, the protection provided by
the equipment could be impaired. This instrument must be used in a
normal condition (in which all means for protection are intact) only.
To prevent electrical shock, disconnect the Agilent 86060C from
mains before cleaning. Use a dry cloth or one slightly dampened with
water to clean the external case parts. Do not attempt to clean
internally.
This is a Safety Class 1 product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall only be
inserted in a socket outlet provided with a protective earth contact.
Any interruption of the protective conductor inside or outside of the
product is likely to make the product dangerous. Intentional
interruption is prohibited.
No operator serviceable parts inside. Refer servicing to qualified
personnel. To prevent electrical shock, do not remove covers.
On Option 002 dual input instruments, any light on an unselected "A"
channel will likely be output on one of the unselected "B" channels.
On Option 002 dual input instruments, any light on an unselected "B"
channel will likely be output on an unselected "A" channel.
To avoid exposure to light energy, always cover all unused channels.
General Safety Considerations
iii
Advertisement
Table of Contents
