Table of Contents
Advertisement
Specifications
Characteristics
Nominal values
Calibration cycle
C A U T I O N
Specifications and Regulatory Information
This section lists specifications and regulatory information of the
Agilent 86060C-series lightwave switches. Specifications apply over the tem-
perature range +0°C to +55°C (unless otherwise noted). All specifications
apply after the instrument's temperature has been stabilized after 120 minutes
of continuous operation.
Table 1-4 on page 1-8
The distinction between these terms is described as follows:
Specifications describe warranted performance.
Characteristics provide useful information by giving functional, but nonwar-
ranted, performance parameters. Characteristics are printed in italics.
Nominal value indicates the expected, but not warranted, value of the param-
eter.
Agilent Technologies warrants instrument specifications over the recom-
mended calibration interval. To maintain specifications, periodic recalibrations
are necessary. We recommend that the Agilent 86060C-series switches be cali-
brated at an Agilent Technologies service facility every 24 months.
Improper connector care, cleaning, or use of mismatched cable connectors can
invalidate the published specifications and damage connectors. Clean all cables
before applying to any connector. Repair of damaged connectors due to
improper use is not covered under warranty. Refer to
for Accurate Measurements" on page 1-12
Specifications and Regulatory Information
lists specification, characteristics, and nominal values.
for proper cleaning procedures.
General Information
"Cleaning Connections
1-7
Advertisement
Table of Contents
