Step 2. Check The Fuse - Agilent Technologies 86060A User Manual

1 Locate the line-input connector on the instrument's rear panel.
2 Disconnect the line-power cable if it is connected.
3 Use a small flat-blade screwdriver to open the pull-out line fuse drawer.
W A R N I N G
4 Verify that the value of the line fuse in the pull-out drawer is correct.
Installing

Step 2. Check the fuse

Step 2. Check the fuse

For continued protection against fire hazard, replace line fuse only
with same type and ratings (2A/250V). The use of other fuses or
materials is prohibited.
Figure 2-1. Changing the fuse
115V operation, 5×20 mm, 2A, 250 V, fast acting UL/CSA fuse: . . 2110-0702
230V operation, 5×20 mm, 2A, 250 V, fast acting IEC fuse:. . . . . . 2110-0702
2-4