Table of Contents
Advertisement
Table 32. Boot Settings details (continued)
Option
Clean all SysPrep variables and order When this option is set to None, BIOS will do nothing. When set to Yes, BIOS will
UEFI Boot Settings
Table 33. UEFI Boot Settings
Option
UEFI Boot Sequence
Boot Option Enable/Disable
Network Settings
To view the Network Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS
> Network Settings.
NOTE:
Network Settings are not supported in BIOS boot mode.
Table 34. Network Settings details
Option
UEFI PXE Settings
Number of PXE Devices
PXE Device n (n = 1 to 4)
PXE Device n Settings(n = 1 to 4)
UEFI HTTP Settings
HTTP Device n (n = 1 to 4)
HTTP Device n Settings (n = 1 to 4)
UEFI ISCSI Settings
ISCSI Initiator Name
ISCSI Device1
iSCSI Device1 Settings
UEFI NVMe-oF Settings
NVMe-oF
NVMe-oF Host NQN
36
Pre-operating system management applications
Description
delete variables of SysPrep #### and SysPrepOrder this option is a onetime option,
will reset to none when deleting variables. This setting is only available in UEFI
Boot Mode. This option is set to None by default.
Specifies the UEFI boot sequence. Enables or disables UEFI Boot options.
NOTE:
This option controls the UEFI boot order. The first option in the list will
be attempted first.
Description
Enables you to change the boot device order.
Enables you to select the enabled or disabled boot devices
Description
Enables you to control the configuration of the UEFI PXE device.
This field specifies the number of PXE devices. This option is set to 4 by
default.
Enables or disables the device. When enabled, a UEFI PXE boot option is
created for the device.
Enables you to control the configuration of the PXE device.
Enables you to control the configuration of the UEFI HTTP device.
Enables or disables the device. When enabled, a UEFI HTTP boot option is
created for the device.
Enables you to control the configuration of the HTTP device.
Enables you to control the configuration of the iSCSI device.
Specifies the name of the iSCSI initiator in IQN format.
Enables or disables the iSCSI device. When disabled, a UEFI boot option
is created for the iSCSI device automatically. This is set to Disabled by
default.
Enables you to control the configuration of the iSCSI device.
Enables you to control the configuration of the NVMe-oF devices.
Enables or disables the NVMe-oF feature. When enabled, it allows to
configure the host and target parameters needed for fabric connection.
This is set to Disabled by default.
This field specifies the name of the NVMe-oF host NQN. Allowed input is
in the following format: nqn.yyyy-mm.<Reserved Domain Name>:<Unique
String>. Leave it empty to use system generated value with following
format: nqn.1988-11.com.dell:<Model name>.<Model number>.<Service
Advertisement
Table of Contents
