Table of Contents
Advertisement
7.26.11.1
Using Conventional Squelch Operation Features
Procedure:
1
or
to Sql.
2 Press the Menu Select button directly below Sql.
The display shows Squelch XX, where XX is the value for the current squelch.
3 Perform one of the following actions:
•
Press the Menu Select button directly below "+" to increase the squelch volume.
•
Press the Menu Select button directly below "-" to decrease the squelch volume.
4 Press
to return to the selected channel.
7.26.12
Using the PL Defeat Feature
This feature allows you to override any coded squelch programmed to a channel. Your radio also
unmutes any digital activity on a digital channel. When this feature is active, the Carrier Squelch status
indicator is displayed.
Procedure:
Place the programmed PL Defeat switch in the PL Defeat position.
One of the following indications occurs :
•
Your radio plays the active transmission on the channel.
•
If no activity is present, your radio is muted.
7.26.13
Digital PTT ID Support
This feature allows you to see the radio ID (number) of the radio from whom you are currently receiving
a transmission. The receiving radio and the dispatcher can view the ID, which consists of up to a
maximum of eight characters.
The ID number of your radio is also automatically sent every time you press the PTT button. This
feature is programmed per channel. For digital voice transmissions, the ID of your radio is sent
continuously during the voice message.
7.26.14
Smart PTT (Conventional Only)
Smart PTT is a per-personality, programmable feature used to keep radio users from talking over
other radio conversations. When Smart PTT is enabled in your radio, you cannot transmit on an active
channel.
The following table shows the variations of Smart PTT.
Mode
Transmit Inhibit on Busy Channel with Carrier
Chapter 7 : Advanced Features
Description
You cannot transmit if traffic is detected on the
channel.
MN003441A01-AP
119
Advertisement
Table of Contents
