Voice Announcement; Site Selectable Alerts (Astro 25 Trunking); Sending Ssa Notification To Single Site - Motorola APX 900 User Manual

Table of Contents

Advertisement

7.24

Voice Announcement

This feature enables the radio to audibly indicate the current feature mode, zone, or channel assigned
to the user.
The available voice announcement (VA) priority options are:
High
Voice announcement is enabled even when the radio is receiving calls.
Low
Voice announcement is disabled when the radio is receiving calls.
NOTE: If the Voice Announcement field is set to Enabled, after an interruption by a
momentary tone one of the following scenarios occurs:
If Suppress Replay field is Enabled, voice announcement replays.
If Suppress Replay field is Disabled, voice announcement turns off.
7.25

Site Selectable Alerts (ASTRO 25 Trunking)

A Site Selectable Alert (SSA) is an Intelligent Lighting indicator with audio alert. The alert is sent to
radios at sites to notify the users when special situations occur.
Your radio supports up to 250 site aliases. Only authorized radios are enabled to send SSA.
NOTE:
The alert alias, alert tone, and alert period are configured in the Customer Programming
Software (CPS). For more information, contact your system administrator.
The SSA alert volume is reduced when voice audio is received at the same time. It is important
that the SSA audio file is created with clear loud audio to ensure audio clarity at reduced levels.
7.25.1

Sending SSA Notification to Single Site

Procedure:
1
or
to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3
or
to Start Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4
or
to the desired Site Alias. Press the Menu Select button directly below Sel.
The display shows the Select Alert screen.
5
or
to select the desired Alert Alias and press the Menu Select button directly below
Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed.
If the request is successful, the display shows Req successful.
MN003441A01-AP
Chapter 7 : Advanced Features
109

Advertisement

Table of Contents
loading

Table of Contents