Removing A Priority Status And A Reply Request From A Text Message; Receiving A Text Message; Viewing A Text Message From The Inbox - Motorola APX 900 User Manual

Table of Contents

Advertisement

7.14.4.6

Removing a Priority Status and a Reply Request from a Text Message

Prerequisites: Ensure that an outgoing message is composed to allow you to perform this procedure.
See
Composing and Sending a New Text Message on page 77
Procedure:
1 Press the Menu Select button directly below Optn .
2
or
to Mark Important and press the Menu Select button directly below Sel to
remove the priority status icon.
3
or
to No Req Reply and press the Menu Select button directly below Sel to remove
the reply status icon.
The display shows the normal message icon on the label bar.
7.14.4.7

Receiving a Text Message

When and where to use:
NOTE: When you receive a message that is flagged with the Request Reply icon, you must
manually respond to the sender that you have received the message. The system does not
automatically send a notification to acknowledge that the message was received.
Procedure:
Do one of the following to receive a text message. You can use the options interchangeably
depending on your preference and the programmed functions.
Receiving a text message using the Data Feature button or the TMS Feature button:
When you receive a message, press and hold the preprogrammed Data Feature button or
the TMS Feature button to access the Inbox.
Receiving a text message using the radio menu:
When the new message icon appears and the display shows momentary New msg, press the
Menu Select button directly below TMS to access the Inbox.
The display shows a list of aliases or IDs, with the sender of the latest received message on top.
7.14.4.8

Viewing a Text Message from the Inbox

When and where to use: The Inbox can hold up to 30 messages.
NOTE:
or
Procedure:
1 Perform one of the following actions:
Press the preprogrammed TMS Feature button to access the TMS feature screen.
to Inbox and press the Menu Select button below Sel .
Press and hold the preprogrammed TMS Feature button to access the Inbox.
or
to TMS and press the Menu Select button directly below TMS to access the TMS
feature screen.
to read the message if the content fills more than one screen.
or
to Inbox and press the Menu Select button below Sel .
MN003441A01-AP
Chapter 7 : Advanced Features
for more information.
or
81

Advertisement

Table of Contents
loading

Table of Contents