Table of Contents
Advertisement
MN003441A01-AP
Chapter 7 : Advanced Features
5 Release the PTT button to receive.
You hear a Transmit End Tone.
7.11.2
Responding to Evacuation Indicator
When and where to use: The Incident Commander can trigger one of sixteen Tactical Alerts from
the Command Terminal. These alerts can target individuals or groups of users within the Fireground
Communication System. The ergonomic (visual and audible) response for the Tactical Alerts can be
customized.
Your radio sounds the audible response at the profile maximum alert tone volume level. The display
shows the configurable programmed alert text and intelligent lighting.
Procedure:
1 Perform one of the following actions:
•
Press the radio Top Side button.
•
Press the RSM Side Button 1 if the radio is connected to RSM.
•
Press the PTT button. PTT button must be configured in Customer Programming Software
(CPS) to enable this function.
The radio cancels the indications, a tone sounds and the radio sends an acknowledgment to the
command terminal.
NOTE: Move the Volume Control Knob to adjust the volume of the audible alert from
full volume.
7.12
Sending Evacuation Tone
This feature enables the evacuation tone to be heard on the transmitting radio and on any radio that is
able to receive the tone instruction.
Procedure:
Once the tone begins to sound, if the orange button is released the tone continues to alarm on all
radios within the talkgroup, until the PTT button is released.
NOTE: Radio does not transmit evacuation tone if the radio is in secure mode.
7.13
Automatic Registration Service
Automatic Registration Service (ARS) provides an automated data application registration for your
radio. When you turn on the radio, the device automatically registers with the server. Data applications
within the fixed network determine the presence of a device on the system and send data to the
device.
The ARS consists of the following mode:
•
ARS Server Mode (Default mode)
•
ARS Non-server Mode
74
Advertisement
Table of Contents
