Removing The Rear Wheel - KTM 390 Duke AUS 2013 Owner's Manual

13 WHEELS, TIRES
13.3

Removing the rear wheel

–
Clean the thread of the wheel spindle and screw
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Insert wheel speed sensor
Guideline
Screw, wheel speed sensor holder
–
Mount and tighten screws
–
Take the motorcycle off of the front wheel stand. (
–
Pull the front brake and push down hard on the fork several times to align the fork legs.
–
Tighten screws
Guideline
Screw, fork stub
B01391-11
Finishing work
–
Take the motorcycle off of the rear wheel stand. (
x
Preparatory work
–
Raise the motorcycle with the rear wheel stand. (
Main work
–
Remove screw
.
2
into the hole. Mount and tighten screw
3
.
5
.
6
and pull wheel speed sensor
1
.
2
M8 30 Nm
(22.1 lbf ft)
.
4
M6 8 Nm (5.9 lbf ft)
p. 77)
M8 15 Nm
(11.1 lbf ft)
p. 75)
p. 75)
out of the hole.
2
105