KTM 390 Duke AUS 2013 Owner's Manual page 74

9 SERVICE SCHEDULE
Check the valve clearance.
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking, leaks, and correct routing.
Check the antifreeze and coolant level. (
Check the cables for damage and routing without sharp bends.
Check that the throttle cables are undamaged, routed without sharp bends, and set correctly.
Change the air filter. Clean the air filter box.
Check the screws and nuts for tightness.
Change the front brake fluid.
Change the rear brake fluid.
Check the headlight setting. (
Check that the radiator fan is functioning properly.
Final check: Check the vehicle for roadworthiness and take a test ride.
Read out the fault memory using the KTM diagnostics tool after a test ride.
Make the service entry in KTM DEALER.NET and in the service booklet.
○
One-time interval
●
Periodic interval
x
p. 133)
x
x
x
x
p. 128)
x
x
x
x
Every 15,000 km (9,321 mi) or every 2 years
Every 7,500 km (4,660 mi) or annually
Once after 1,000 km (621.4 mi)
x
x
72
○ ●
○ ●
○ ●
●
○ ●
●
○ ●
●
●
○ ●
○ ●
○ ●
○ ●
○ ●