Installing The Rear Wheel - KTM 390 Duke AUS 2013 Owner's Manual

Hide thumbs Also See for 390 Duke AUS 2013:
Table of Contents

Advertisement

13
WHEELS, TIRES
13.4

Installing the rear wheel

Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Remove nut
Holding the rear wheel, withdraw wheel spindle
adjuster.
Push the rear wheel forward as far as possible and take the chain off the rear sprocket.
Warning
Danger of accidents Reduced braking effect caused by damaged brake discs.
Pull the rear wheel back and take it out of the swingarm.
Info
Do not operate the foot brake when the rear wheel is removed.
101900-10
x
and the washer. Remove chain adjuster
3
Always lay the wheel down in such a way that the brake discs are not dam-
aged.
.
4
with the washer and chain
54
106

Advertisement

Table of Contents
loading

This manual is also suitable for:

390 duke eu 2013390 duke mal 2013

Table of Contents