Table of Contents
Advertisement
13
WHEELS, TIRES
Warning
Danger of accidents No braking effect when operating the rear brake.
–
After installing the rear wheel, always operate the foot brake until the pressure point is reached.
Main work
–
Check the rear hub rubber dampers.
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change the wheel bearing.
–
Clean and grease the shaft seal rings
Long-life grease (
–
Clean the thread of the wheel spindle and nut
–
Clean the fixing locations on the brake caliper support and swingarm.
–
Install the rubber damper and rear sprocket carrier on the rear wheel.
101901-10
–
Position the rear wheel.
The brake linings are correctly positioned.
–
Push the rear wheel as far forward as possible and place the chain on the rear sprocket.
x
(
p. 108)
x
and mating surfaces
1
p. 173)
.
2
107
of the spacers.
A
Advertisement
Table of Contents
