Table of Contents
Advertisement
Severity: Warning
Parameters:
[arg1]: Socket number, 1-based [arg2]: CoreNumber [arg3]: McBankNumber [arg4]: McaStatus [arg5]:
McaAddress [arg6]: McaMisc
User Action:
Complete the following steps:
1. Perform a virtual reseat or AC cycle the server.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU4033F: TPM Firmware recovery is in progress. Please DO NOT power off or reset system.
Severity: Warning
User Action:
Information only; no action is required.
Note: The system will not respond to power off signal (FQXSFPU4034I) while TPM firmware recovery in
progress.
• FQXSFPU4034I: TPM Firmware recovery is finished, rebooting system to take effect.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4035M: TPM Firmware recovery failed. TPM chip may be damaged.
Severity: Warning
User Action:
Complete the following steps:
1. Reboot the system.
2. If the error recurs TPM related features will not work.
3. If the problem persists, collect Service Data logs and contact Lenovo Support.
Note: The solution for this error may involve a system board replacement. If TPM encryption has
been enabled, back up TPM Encryption Recovery Key.
• FQXSFPU4038I: TPM Firmware recovery successful.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4040M: TPM selftest has failed.
Severity: Warning
User Action:
Complete the following steps:
1. Reboot the system.
2. If the error recurs TPM related features will not work.
3. If the problem persists, collect Service Data logs and contact Lenovo Support.
.
177
Chapter 3
UEFI events
Advertisement
Table of Contents
