October 2023
Table 3-1: Device Revision 9 and 10 (HART
Key sequence
Function
Descriptor
Digital to Analog Trim (4–20 mA
output)
Disable Configuration Buttons
Rerange with Keypad
Loop Test
Lower Sensor Trim
Message
Scaled D/A Trim (4–20 mA output) 3, 4, 2
Sensor Temperature/Trend
Upper Sensor Trim
Digital Zero Trim
Password
Scaled Variable
HART Revision 5 to HART Revision
7 switch
Long Tag
Find Device
Simulate Digital Signal
(1)
Only available in HART Revision 7 mode.
3.5.2 Verify configuration with local operator interface (LOI)
You can use the optional LOI to configure the device.
The LOI is a two-button design with internal and external/rear
buttons. On a polished stainless steel housing, buttons are located
internally both on the display and terminal side of the transmitter.
On an aluminum housing, buttons are located on the display and
externally underneath the top metal tag.
To activate the LOI, push any button. LOI button functionality is
shown on the bottom corners of the display. See
3-6
for button operation and menu information.
Quick Start Guide
(continued)
(1)
(1)
(1)
Quick Start Guide
7), DD Revision 1 Fast
®
HART 7
HART 5
2, 2, 7, 1, 5
2, 2, 7, 1, 4
3, 4, 2
3, 4, 2
2, 2, 6, 3
2, 2, 6, 3
2, 2, 2, 1
2, 2, 2, 1
3, 5, 1
3, 5, 1
3, 4, 1, 2
3, 4, 1, 2
2, 2, 7, 1, 6
2, 2, 7, 1, 5
3, 4, 2
3, 3, 2
3, 3, 2
3, 4, 1, 1
3, 4, 1, 1
3, 4, 1, 3
3, 4, 1, 3
2, 2, 6, 5
2, 2, 6, 4
3, 2, 2
3, 2, 2
2, 2, 5, 2, 3
2, 2, 5, 2, 3
2, 2, 7, 1, 2
N/A
3, 4, 5
N/A
3, 4, 5
N/A
Table 3-2
and
Figure
15