–
TRIANGLE LEG TABLE
1. Turn the table upside down.
2. Unscrew the bolts holding the legs.
3. Unscrew the feet and the tapping screw in the top of the leg.
4. Unscrew all the screws to separate the frame from the table.
Fittings - Steel
Gliders - PA/steel
Legs - Wood
Screws - Steel
Frame - Wood
Tabletop - Wood
–
54
–
BOA TABLE
1. Turn the table upside down.
2. Unscrew all the screws holding the legs and crossbar.
3. Unscrew the gliders from the legs.
Feet - Nylon/Glass fiber mix
Feet - Nylon/Glass fiber mix
Legs - Aluminium
Screw - Steel
Insert - Nylon/Glass fiber mix
Insert - Nylon/Glass fiber mix
Insert - Nylon/Glass fiber mix
Insert - Nylon/Glass fiber mix
End cap - Nylon/Glass fiber mix
Cross bars - Aluminium
Screw - Steel
Connector - Nylon/Glass fiber mix
Table - Plywood
–
55