–
SOFT EDGE 60 CHAIR WITH UPHOLSTERY
1. Turn the chair upside down.
2. Remove the cap from the gliders.
3. Unscrew the screw and remove the gliders' receivers.
4. Remove the upholstery and the foam from the wooden shell.
Cover - Textile
Foam - PU
Cap - PP
Screws - Steel
Receivers - PP
Frame, seat,
backrest - Wood
–
28
–
SOFT EDGE 70 STOOL
1. Hold the seat while unscrewing the rivets, using a power drill with a 10mm bit.
2. Pull out the gliders from the legs.
3. Turn the chair upside down and drill out the rivets holding the cover.
Seat - Wood
Rivets - Aluminium
Frame - Steel
Gliders - PE-LLD
–
Ø10mm
29