Soft Edge 90 Bar Stool With Upholstery; Soft Edge 100 Lounge - Hay Boa Table Disassembly

–

SOFT EDGE 90 BAR STOOL WITH UPHOLSTERY

1. Hold the seat and backrest while unscrewing the rivets,
using a power drill with a 10mm bit.
2. Pull out the gliders from the legs.
3. Turn the bar stool upside down and drill out the rivets holding the cover.
4. Remove the upholstery and the foam from the wooden shell.
Ø10mm
34
–
Foam - PU
Seat - Wood
Backrest - Wood
Rivets - Aluminium
Screws - Steel
Frame - Steel
Cover - PP
Gliders - PE-LLD
–

SOFT EDGE 100 LOUNGE

1. Hold the seat and backrest while unscrewing the rivets,
using a power drill with a 10mm bit.
2. Pull out the gliders from the legs.
3. Turn the chair upside down and drill out the rivets holding the cover.
Backrest - Wood
Seat - Wood
Rivets - Aluminium
Frame - Steel
Gliders - PE-LLD
–
Ø10mm
Cover - PP
35