–
SOFT EDGE 72 STOOL
1. Turn the stool upside down.
2. Remove the cap from the gliders.
3. Unscrew the screw and remove the gliders' receivers.
Cap -PA
Screws - Steel
Receivers - PP
Frame, seat - Wood
30
–
–
SOFT EDGE 80 BAR STOOL
1. Hold the seat while unscrewing the rivets, using a power drill with a 10mm bit.
2. Pull out the gliders from the legs.
3. Turn the stool upside down and drill out the rivets holding the cover.
Seat - Wood
Rivets - Aluminium
Frame - Steel
Gliders - PE-LLD
–
Ø10mm
31