–
SOFT EDGE 50 SLED WITH UPHOLSTERY
1. Hold the seat and backrest while unscrewing the rivets,
using a power drill with a 10mm bit.
2. Unscrew the gliders from the sled legs.
3. Turn the chair upside down and drill out the rivets holding the cover.
4. Remove the upholstery and the foam from the wooden shell.
Ø10mm
26
–
Cover - Textile
Foam - PU
Seat - Wood
Backrest - Wood
Rivets - Aluminium
Screws - Steel
Frame - Steel
Cover - PP
Gliders - PA
–
SOFT EDGE 60 CHAIR
1. Turn the chair upside down.
2. Remove the cap from the gliders.
3. Unscrew the screw and remove the gliders' receivers.
Cap - PP
Screws - Steel
Receivers - PP
Frame, seat, backrest - Wood
27
–